%O2201 
(License Plate Contour CMN)
T1 M06; (ENDMILL)
G90 G154 P22 X0.0 Y-3.0;
S1146 M03; 
G43 H01 Z-0.5; (FEED DOWN)
M08;
;
; (RADII)
G42 X0.0 Y6.50 F10.; (LEFT SIDE CORRECT FEED)
G01 X0.0 Y6.235 F10.; (LEFT SIDE)
G02 X0.265 Y6.5 R0.265 F125.;(TOP LEFT RADII)
G01 X12.235 Y6.5 F10.; (TOP)
G02 X12.5 Y6.235 R0.265 F125.;(TOP RIGHT RADII)
G01 X12.5 Y0.265 F10.;(RIGHT)
G02 X12.235 Y0. R0.265 F125.;(BOTTOM RIGHT RADII)
G01 X0.265 Y0.0 F10.; (BOTTOM)
G02 X0 Y0.265 R0.265 F125.;(BOTTOME LEFT RADII)
G40; (CANCEL CUTTER COMP)
M09;
M05;
G91 G28 G00 Z0.;
M30;
%